STGL SETUP Submenus
19
PitchOffsCmd(PO) (SL5000r/T5000r)
Ignore Pitch Offset Command. Selects the PaperFeed shift setting.
Protocol C Code
Protocol Control Codes are the special control characters that prepare the
printer to receive instructions. For example, the <ESC> character tells the
printer that a command code will follow and the <ENQ> character asks for the
printer status.
•
Standard (default). Use the predefined Standard (non-printable) Protocol
Control Codes.
•
Non Standard. Use the predefined Non-Standard (printable) Protocol
Control Codes.
•
User Defined. New menu options will be unhidden to define hex-values
for each Protocol Control Code Character.
The <ESC>LD command (Custom Protocol Command Codes Download) will
place the menu-setting in User-Defined mode, and overrides the user-defined
character codes in the menu with the defined characters in the command.
Prt Mod Cmd(PM) (SL5000r/T5000r)
Ignore Print Mode Command. Selects continuous, cut, tear-off or peel-off print
modes.
Prt Set. Cmd(PC) (SL5000r/T5000r)
Ignore Printer Setting Command. Allows changing several configuration
options.
Prt Type Cmd(PH) (SL5000r/T5000r)
Ignore Print Type Command. Selects the Thermal Transfer or Direct Thermal
print type.
Table 1. Protocol Control Codes
Control Char Standard Non-Standard Description
STX 0x02 0x7B = { Start of Data
ETX 0x03 0x7D = } End of Data
ESC 0x1B 0x5E = ^ Command code to follow
NULL 0x00 0x7E = ~ Cutter command
ENQ 0x05 0x40 = @ Get printer status, Bi-Com mode
CAN 0x18 0x21 = ! Cancel print-job, Bi-Com mode
Off-Line 0x40 0x5d = ] Take printer offline
Commentaires sur ces manuels