SATO CL608 Spécifications télécharger pdf (Page 9)

CL608e/612e FAQs

SATO EUROPE 5

TOC

How do I change the darkness setting?

There are 5 darkness settings. The highest numbers represent the

darker settings and the current setting is indicated by an underline

under one of the range settings. To view the settings you must go

into the User mode by pressing the LINE key once (the printer dis-

play shows OFFLINE). Next, press the FEED and LINE keys simul-

taneously to see "PRINT DARKNESS" on the display. To move the

underline to the desired setting, press the LINE key. Once the cor-

rect setting is underlined press the FEED key to accept and

advance to the next adjustment.

How do I change the print speed?

There are 5 print speed settings (50, 75, 100, 125 and 150mm/s).

To view the settings you must enter the User mode by pressing the

LINE key once (the printer display shows OFFLINE). Next, press

the FEED and LINE keys simultaneously to view "PRINT DARK-

NESS" on the display. Press FEED again to advance to the print

speed setting. Now press the LINE key to move the underline to the

desired setting. Press FEED to confirm it. (NOTE: This setting can

be overwritten by software).

Does the CL 608/612e have a last label reprint feature?

Yes. You must press the FEED key, while in online mode, to reprint

the last label.

How do I feed a blank label?

Press the FEED button while the printer is offline to feed a blank

label. If you have problems check that the print media has been

loaded properly

How do I cancel my print job?

The current print job can be cancelled by using the display: set the

printer offline and press the LINE and FEED buttons simulta-

neously. Next, press the FEED button until the display shows "can-

cel current print job". Use the LINE button to select YES or NO and

FEED to clear.

A command to cancel the print job can also be sent to the driver via

the software. Alternatively, switching the printer off and on again will

also erase all current print jobs.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

SATO CL608 Spécifications Page 9