Sato CT410 Manuel d'utilisateur télécharger pdf (Page 116)

Two-Dimensional Bar Codes

Data Matrix, Data Format

Command Structure <ESC>BXaabbccddeeefffghh

aa = Format ID. 01-06 or 11-16.

bb = Error correction level. 00, 05, 08, 10, 14 or 20. All other

values entered will be processed as a 00.

cc = Horizontal cell size. 03 - 12 dots/cell.

dd = Vertical cell size. 03 - 12 dots/cell.

eee = Number of cells in one line. Must use 000 to optimize.

f f f = Number of cell lines. Must use 000 to optimize.

g = Mirror Image

0 = Normal Print

1 = Reverse Print

hh = Guide Cell Thickness. 01-15. 01 indicates normal type.

Example: <ESC>BX03080505000000001

Placement: Immediately preceding data to be encoded

Default: None

Command Function To designate the format for a Data Matrix two-dimensional bar code

image on a label.

Printer Input

<ESC>A

<ESC>%0<ESC>V0100<ESC>H0100<ESC>BX05051010000000001

<ESC>DCDATA MATRIX DATA MATRIX

<ESC>Q1<ESC>Z

Printer Outpu There is no printer output as a result of this command. See the

<ESC>DC Print Data command for printer output.

Special Notes 1. If any of the parameters entered are outside the valid range, a

symbol will not be printed when the <ESC>DC Print Data

command is sent to the printer.

2. The number of cells per line (eee) and the number of cell lines (fff)

should be specified as all zeroes, allowing the printer to

automatically calculate the optimum configuration for the symbol.

3. The Reference Point for the Data Matrix symbol is the upper-left

corner. If an <ESC>R Rotate command is used to rotate the

symbol, it will rotate in the counter-clockwise direction.

Section 4. Programming Reference

Page 4-729001069A SATOCTSeriesPrinters

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 198 199

Pas de commentaire

Sato CT410 Manuel d'utilisateur Page 116