Sato CT410 Manuel d'utilisateur télécharger pdf (Page 42)

5. View the Print Head Assembly from the front of

the printer. Locate the mounting screw on the top

of the assembly. It is accessible through a hole in

the top of the assembly . Unscrew these Head

Retaining screw and set it aside.

6. The Print Head should now be loosened from the

top of the assembly by grasping either side and

carefully pulling it forward.

7. Disconnect the connecting cable from the print

head connectors and set the Print Head aside.

8. Carefully attach the new Print Head to the

connectors, using caution to make sure the

connector keys are correctly positioned. The

connector is keyed so that it can only be inserteed

easily in the correct orientation.

NOTE: Be careful not to scratch the printing surface

of the print head while installing it. Scratching the

surface will cause permanent and irreparable

damage and is not covered by the warranty!

9. Locate the mounting screw in the top plate

assembly and alignit with the tapped holes in the

new Print Head.

10. Re-secure the print head by tightening the screw.

Section 3: Cleaning and Maintenance

Page3-49001069A SATOCTSeriesPrinters

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 198 199

Pas de commentaire

Sato CT410 Manuel d'utilisateur Page 42